Theoretically, our VFD can adapt to motor voltages of 0-415V. The default output voltage of the VFD is 380V, which can be adjusted as needed. When we adjust the output voltage of the VFD, their rated current will not change. 220V is the most widely used application scenario besides 380V.
That is to say, for the same inverter, when its output voltage is adjusted from 380V to 220V, the current remains unchanged, the voltage becomes smaller, and therefore the power will also decrease accordingly.
The following are the corresponding output parameters of the VFD at 380V and 220V voltages:
The default output frequency of the VFD is 50Hz. If your motor is 60Hz or other, you can adjust it as follows:
P0-03 = 1;
P0-10 = 60;
P0-12 = 60;
P0-08 = 60;
P1-04 = 60;